Dial Thickness Gauge

Product Description

Dial Thickness Gauge

• Available in different throat depths, suitable for different measurement requirements.
  
• In series J130, J138/L, and J142, measurement pressure is independent of the user, resulting in accurate readings of thickness without personal bias.
  
• J138. 'Push Down Type' thickness gauge is particularly useful where fine measurement is not required - for example plywood. Pushing down the plunger with the index finger closes the measuring contacts.
  
• Well-balanced frames and handgrips coupled with lightweight make these gauges easy to use for the measurement.
  
• Available in different readings and travels.
  
• Supplied with 10 mm anvil as standard. 20 mm and larger available on request.
  
• For the American market, thickness gauges meeting the requirements of AGD standard available.
  
  Specification

Type	Reading	Range	Graduation	Depth of Throat
J130/0	0.1mm	10.0mm	0-10	30mm
J130/3	0.01mm	10.0mm	0-100	30mm
J130/1	0.001inch	0.5inch	0-100	1.2inch
J130/6	0.002mm	2.0mm	0-20	30mm
J130/7	0.002mm	5.0mm	0-20	30mm
J130/8	0.0001inch	0.05inch	0-100	1.2inch
J130/9	0.0001inch	0.2inch	0-100	1.2inch
J142/0	0.1mm	10.0mm	0-10	100mm
J142/3	0.01mm	10.0mm	0-100	100mm
J142/1	0.001inch	0.5inch	0-100	4inch
J138/0	0.1mm	25.0mm	0-10	50mm
J138A/3	0.01mm	25.0mm	0-100	50mm
J138A/1	0.001inch	1.0inch	0-100	2inch
J138/OL	0.1mm	25.0mm	0-10	50mm
J138A/3L	0.01mm	25.0mm	0-100	50mm
J138A/1L	0.001inch	1.0inch	0-100	2inch